Sold out
Features and Specs
- PMSM (Permanent Magnet Synchronous Motor) with High Power Factor.
- 30-Watt Power Consumption on full speed
- Save Up to 70% of Energy Consumption as compared to Conventional Fan(100-watt)
- High power factor
- NoiselessMotor
- 99% CopperWinding
- Silicon Coated Electric Steel SheetArmature
- RF Remote Control with Auto off timer function1h-6h
- 10% Higher Air Delivery as compared to Conventional Fan(100Watt)
- Stable Performance on low and high Voltage (140V~ –240V~)
- Under and Over Voltage Protection (110V~ –280V~)
Product Warranty:
The company will provide 1 year PCB and 2 years motor warranty. For more info visit Warranty Claim
IMPORTANT: This fan must not be used with a dimmer. Using a dimmer will void all warranties.
Installation Instructions:
WARNING:
BE SURE TO TURN OFF THE ELECTRICAL SUPPLY AT THE CIRCUIT BREAKER BEFORE INSTALLATION.
INSTALLATION MUST BE DONE BY A QUALIFIED ELECTRICIAN ONLY.
DO NOT ATTEMPT TO INSTALL THE UNIT YOURSELF.
DO NOT USE WITH A DIMMER. ( IMPORTANT: using with a dimmer will void the warranty )
CAUTION:
- Improper installation may result in a risk of fire, electrical shock, or injury to persons.
- Be sure the fan is to be connected to the grounded outlet box.
- It’s ESSENTIAL that blades be NO LESS THAN 2.3 meters from the floor and that adequate clearance exists between the fan and adjacent walls, furnishings, etc.
- If the fan is operating abnormally, cut the power off immediately for inspection.
- T indicates suitable for tropical climates.
- Ta-Ambient temperature 45 C.
- Children should be supervised to ensure that they do not play with the appliances.
CLEANING:
Disconnect the electrical supply for safety purposes. Use a cloth with a neutral cleaning agent to clean the fan. Then wipe it with a dry cloth. DO NOT IMMERSE THE MOTORHEAD IN WATER.
Product Specification:
Size | Motor Type | Voltage | RPM | WATT | Speed Control | Power Factor |
56” | PMSM | 140-240 | 350 | 30 | 6 Speed Remote controlled | 0.99 |
Reviews
Clear filtersThere are no reviews yet.